Zu Produktinformationen springen
1 von 30

MechMaxx

1100lb 420cc E-start Gas Engine Stand-ON Hydraulic Track Dumper Hydraulic Tipping and Lifting with Self-Loading, T80HL

1100lb 420cc E-start Gas Engine Stand-ON Hydraulic Track Dumper Hydraulic Tipping and Lifting with Self-Loading, T80HL

Normaler Preis €7.299,00
Normaler Preis €9.499,00 Verkaufspreis €7.299,00
Sale Ausverkauft
Inkl. Steuern. Versand wird beim Checkout berechnet
Anzahl
ENGINE
Engine Type Single cylinder; 4 stroke; air cooled; OHV
Model Name  Loncin G420F(D)
Displacement/Horsepower 420cc; 15HP
Engine Power 9.0 kW / 3600 rpm
Start E-start
Maximum Torque 26.5 Nm/2500 rpm
DIMENSIONS & SPECIFICATIONS
Overall Length (w/o Shovel)  85.5 in
Overall Length with Shovel 112 in
Overall Height 47 in 
Lifting Overall Height 98.5 in
Overall Width 29 in 
Max. Overall Height 120 in
Max. dumping height 65.4 in
Loading Capacity 1102 lbs
Weight 1631 lbs
Operating Weight 1786 lbs
Wheelbase 38.8 in 
Bucket Capacity 9.5 cu ft 
Track Width 7.09 in 
Track Length 51.2 in 
Track Height 11.8 in 
Dump Front End Height 33.3 in 
Dump Back End Height 43.3 in 
Dump Width 24.3 in 
Console Height 40.2 in 
Platform Ground Clearance 10.4 in 
OPERATION 
Working Type Self Loading and Unloading
Transmission Hydrostatic Track Drive System
Parking Brake Yes
Operator Platform Stand-on
PERFORMANCE
Max.Travel Speed 0-2.73 mph
Min. Travel Speed 0-1.37 mph
Max. Gradeability 30%
Ground Pressure (with Operator) 2.9 psi
Battery Capacity 12V 20Ah
Pump Type Triple Gear Pump
Hydraulic pressure 2900 psi
SERVICE & FILL CAPACITIES
Fuel Tank Capacity 1.72 gal
Hydraulic System 6.13 gal 

WARNING: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soot, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s)  for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.

Vollständige Details anzeigen